BEFORE YOU BEGIN……………………………………………5
ABOUT YOUR SYSTEM…………………………………………6
INTRODUCTION TO THE SYSTEM……………………..6
ABOUT ALTERNATIVE SITE TESTING (AST)………………..7
CONTENTS OF THE KITS………………………………………9
SETTING THE METER AND DELETING THE MEMORY......13
1. Setting the date and time…………………………..…..13
2. Deleting the Memory…………………………………..14
THE TWO MEASURING MODES……………………………..15
TESTING WITH BLOOD SAMPLE…………………………….16
Comparing Meter and Laboratory Results……………..22
CONTROL SOLUTION TEST………………………………….23
VIEWING RESULTS ON THE METER……………………….24
Recalling the Stored Test Results………………………24
Reading the Average of Blood Glucose Results………25
CARE AND STORAGE FOR YOUR SYSTEM………………26
Cleaning and Disinfection……………………………….26
METER SPECIFICATION………………………………………28
DISPLAY MESSAGE………………………………………..….31
1
.
Do not place the device in liquid, nor put it where it could fall
into liquid.
2
.
The following basic safety notice should always be taken.
3
.
Use the device only for the intended use described in this
manual.
4.Do not use adjunct which are not supplied by the producer.
5
.
Do not make the device come into contact with surfaces
which
are too hot to touch.
6.Do not use the device where aerosol sprays are being used.
7.Do not use the device if it is not working properly, or if it has
been damaged.
8.Read all the manual, and practice the test, and then use the
product to test your blood glucose. Do all quality control
checks as directed and consult with a diabetes expert.
DANGER - Misuse of this electrical device can cause
electrocution, burns, fire and other HAZARDS.
Basic safety precautions should always be taken, including
all those listed below.
Close supervision is necessary when equipment is used by,
on, or near children, handicapped persons or invalids.
KEEP THE INSTRUCTIONS IN A SAFE PLACE
