Andersson SMI 2.1, Руководство пользователя

Страница: 8 / 21

Using the iron
Warning: the shot-steam function can only be used at high
temperatures. Stop the emission when the temperature
control light comes on, than start ironing again only after
the light has gone off.
Dry ironing
To iron without steam, follow the instructions in section
“steam ironing”, leaving the steam selector on position “0”.
1. Spray Function
Make sure that there is water in the reservoir. Press the
spray button slowly (for a dense spray) or quickly (for a
vaporized spray).
Warning: for delicate fabrics, we recommend moistening
the fabric beforehand using the spray function, or putting
a damp cloth between the iron and the fabric. To avoid
staining, do not use the spray on silk or synthetic fabrics.
Cleaning
Any deposits, starch residue or size left on the plate can
be removed using a damp cloth or an unabrasive liquid
detergent. Avoid scratching the plate with steel wool or
metallic objects. The plastic parts can be cleaned with a
damp cloth then wiped over with a dry cloth.
Self-cleaning
The self-cleaning feature cleans inside the plate, removing
impurities. We recommend using it every 10-15 days.
Directions:
-Fill the reservoir up to the maximum level indicated and
set the steam selector to “0”
-Set the thermostat knob to the maximum temperature
and wait for the light to turn off.
-Pull the plug out of the socket and hold the iron horizon-
tally over the sink.
-Hold the cleanout button setting until all the boiling water,
steam, impurities come out.
-When the soleplate has cooled down, you can clean it
with a damp cloth.