English
- 83 -
Initial Settings
When the TV set is operated for the
fi
rst time,
the IDTV turns on
fi
rst.
Because this is the
fi
rst time the TV is used,
there are no channels stored in the memory.
When the TV is turned on for the
fi
rst time, the
menu for the language selection appears on the
screen. The message “Welcome please select
your language!” is displayed in all language
options sequentially in the OSD:
By pressing the “ ” or “ ” buttons highlight
the language you want to set and press OK
button. After then, “First time installation” OSD
will appear on the screen. By pressing “ ” or “
” buttons, select the country you want to set
and press OK button.
After the “First time installation” is performed,
the following message appears on the screen:
To start installation process, select “Yes”, to
cancel select “No”.
• To select the “Yes” or “No” option, highlight the
item by using “ ” or “ ” buttons and press the
OK button.
The IDTV will automatically tune to the UHF
transmission channels 21 to 68, searching for
digital terrestrial TV broadcasts and displaying
the names of channels found. This process will
take about
fi
ve minutes. To cancel searching,
you can press the “MENU” button at any time
during the process.
After Automatic Search is completed, the
following message asking for analogue channel
search appears on the screen:
To search for analogue channels, select “Yes”.
TV switches to the analogue TV mode. The
menu below is displayed to search for analogue
channels:
Select your Country, Language and Text
language by using “ ” or “ ” and “ ” or “ ”
buttons. Press OK or RED button to continue.
To cancel, press the BLUE button.
For more information on this process, see
“Install Menu” section.
Note
: For proper functioning of digital teletext in DTV
mode, you should set country as UK in analogue
AUTO PROGRAM. (for UK broadcasts only).
Do not turn off the TV while initializing
fi
rst time
installation.
General Operation
Pressing the “TV/DTV” button at any time
while watching television programmes will
switch the TV set between the digital terrestrial
television broadcasting and its normal analogue
broadcasting.
Information Banner
• Whenever you change channel, using the
P- / P+ button or the numeric buttons, the
TV displays the broadcast picture along with
an information banner at the bottom of the
screen (available only in DTV mode). This
will remain on the screen for approximately
three seconds.
• The information banner can also be displayed
at any time while watching TV by pressing the
INFO button on the remote control:
A02_MB25 [GB] (01-TV)_19855W_1900UK_IDTV_NICKEL5_10061155_50141077.indd 20
A02_MB25 [GB] (01-TV)_19855W_1900UK_IDTV_NICKEL5_10061155_50141077.indd 20
25.02.2009 17:08:14
25.02.2009 17:08:14
Содержание A191D DVD
Страница 129: ...50141077...