Operating Manual ILM-4
10
6.3
Settings using the MPI-200 programming adapter
The MPI-200 programming adapter is connected to the ILM-4 conductivity meter via the external
MPI-200-F adapter. It must be ensured that the ILM-4 conductivity meter is permanently connected
to the supply voltage while the parameters are being set.
After the sensor is connected to the PC and the user software is opened, the following window ap-
pears:
1. Information on the current process value
2. Buttons for changing the parameter setting
3. Information on the current source value
4. Adjustable PC parameters
5. Adjustable sensor parameters
Clicking on the + in the menu opens a submenu
in which parameters can be adjusted.
Note:
For further settings, please see also
the description in the MPI-200 product information.
5.
Connection plug for the MPI-200-F
adapter as an intermediate plug be-
tween the ILM-4 electronics and the
MPI-200 connection 3 (see the next fig-
ure).
3
1: not needed
2: USB port for connecting to a
PC
3: Connection cable to adapter
for ILM-4
Connection of the MPI-200 programming
adapter
1
2
3
1.
2.
3.
4.