Anderic RR2HDC, Инструкция по эксплуатации

Страница: 3 / 12

ANDERIC.COM RR2HDCOM
3
button for 30 seconds will cause remote to exit programming mode.
Programming the remote: Code Search Method
Note: use this method if your brand is not listed in the codes attached, or if all the codes you tried
does not work. This method scans through each code in the database.
Manual search
1. Turn on the device you want to control.
2. Press and release the device mode key you would like to program ( [TV] or [SAT/CBL/DTC] ).
3. Press and hold [S] and [ENTER] keys simultaneously for about three seconds until indicator
light lights and remains on, release both keys.
4. Repeatedly Press [CH+] to search forwards or [CH-] to search backwards; remote will send
the code of POWER one by one.
5. When device is turned off, immediately press [S] button to save and exit. Check if most keys
of remote can control the device, if not, please restart from step 1, remote will pick up where it
left off in code database.
Auto search
1. Turn on the device you want to control.
2. Press and release the device mode key you would like to program ( [TV] or [SAT/CBL/DTC] ).
3. Press and hold [S] and [ENTER] keys simultaneously for about three seconds until indicator
light lights and remains on, release both keys.
4. Press and release [POWER] key, mode indicator light will blink one time and continue to blink
every 2 seconds. Remote is sending codes of POWER one by one. If to press [CH+] / [CH-]
can change the searching direction.
5. When device is turned off, immediately press [S] button to save and exit. Check if most keys
of remote can control the device, if not, please restart from step 1, remote will pick up where it
left off in code database.
Code Display
About: use this method to display the code that is currently programmed.
1. Press and release the device mode key ( [TV] or [SAT/CBL/DTC] ) in which you want to display