Anderic RR2HDC, Инструкция по эксплуатации

Страница: 2 / 12

ANDERIC.COM RR2HDCOM
2
Introduction
We want to thank you for purchasing the RR2HDC Hospitality Remote by Anderic®. This
remote is designed with an easy wipe surface for easy cleaning. With the purchase of this
remote you should receive a screw for the battery cover. Battery cover screw is optional;
battery cover does not need screw to hold it in place. This remote requires two AAA size
batteries, not included.
Optional Security Cable Attachment
Optional Security Cable available from anderic.com, Part number: CBL01 . This cable easily
adheres under the battery cover for a secure and flush appearance.
Pre-programmed Codes
The RR2HDC is pre-programmed by default to LG, Vizio and Philips TVs under TV mode
and Time Warner under SAT/CBL/DTC Mode (i.e. “STB (set-top-box) mode”). If the TV or
STB is not one of the brands above, you must program the remote using the directions
below:
Programming the remote: Direct Code Input Method
1. Turn on the device you want to control, and find the corresponding brand code from attached
code list.
2. Press and release the device mode key you would like to program ( [TV] or [SAT/CBL/DTC] ).
3. Press and hold [S] and [ENTER] keys simultaneously for about three seconds until indicator light
lights and remains on, release both keys.
4. Input the four digits code. If remote successfully saved code, indicator light will go out. If error,
indicator light will blink slowly three times and go out, repeat steps 1-4.
a. Check if most keys of remote control can control the device, if not, please restart step 1-4
using a different code.
b. After trying all codes for your brand without success, please try “Programming the remote
- Code Search” method below.
Note: During the programming mode, pressing any button other than number buttons or not pressing any