reset to factory settings.
NOTE:
If remote is reset to factory settings, the factory code can control 95%
of most popular TVs.
Setting the Sleep Timer
NOTE:
The SLEEP button operates the Sleep function of your TV providing it
supports the Sleep function. Alternatively, you can enable the remote to turn
off your TV after a period of 1 to 99 minutes with the instructions provided in
this section. This feature works even if your TV does not have its own Sleep
function.
•
First make sure you have your remote programmed to your TV using
one of the above programming methods.
•
After successfully programming your remote, try pressing
SLEEP
button first and make sure on screen sleep option
DOES NOT
appear
before continuing. If it does appear then you do not have to continue
with the following steps.
1. Press and hold
[SLEEP]
key until the indicator light blinks and remains
on. Then release the key.
2. Using the numerical pad, press numbers 01 - 99 depending on the
number of minutes you would like before the TV turns off (Example: If
you press 01 the TV will turn off in 1 minute). Then indicator light will
turn off. TV Sleep Timer is now set.
3. Leave the remote pointing towards the TV with an unobstructed path.
NOTE
: To cancel the sleep function, press and hold [
SLEEP]
or [
POWER]
key
for 3 seconds. Pressing any other additional buttons on the remote will not
cancel the sleep timer.
Setup Lock
1. Press and hold
[SET]
and [
POWER]
keys simultaneously for 3 seconds;
the indicator light will remain on; then release the keys.
2. Input code using keys
[9] [9] [6] [6]
; the indicator light shall flash five
times. The remote is locked and it cannot be programmed in any way
unless these steps are repeated.
NOTE:
to unlock the remote, repeat the above steps.
Additional Notes: When changing the batteries, this unit will retain the
programmed codes.
Copyright Dan’s Electronics Etc., Inc. All rights reserved. 2017.
