3. Press and release the key
[CH+]
or
[CH-]
, with each press code will
change. If long press
[CH+]
or
[CH-]
key code it will change faster.
When the channel changes, please press
[SET]
key quickly to save the
code.
NOTE:
Pressing [CH+] scrolls forward, while [CH-] scrolls backward through
code database. During setting process, if no key is pressed in 10 seconds the
setting will be exited automatically.
Learning function
1. Press and hold [
SET
] key, then simultaneously long press [
VOL+
] key
for about 5 seconds; the indicator light will light and remain on. Release
the two keys. Remote is now in learning mode.
2. Point the original remote toward the
RR1001S. The distance should be
within 1-3 cm and eyes of remotes must directly align.
3. Press the key you want to learn from original remote control (the LED of
RR1001S will keep flashing), then press any key of RR1001S
to which
you want to assign the code to. The indicator light will remain on.
4. Repeat from
Step 2
to continue learning other keys.
5. When all keys have learned. Press and hold
[SET]
key, then
simultaneously press
[VOL-]
, the indicator light will go out. The learning
will be saved and exited.
NOTE
: During the learning process, if no key is pressed in 25 seconds the
learning state will be exited without saving.
Code Identification
1. Press and hold
[SET]
and [
POWER]
keys simultaneously for 3 seconds;
the indicator light shall remain on; then release the keys.
2. Input
[9] [9] [0]
with number keys. Indicator light will flash twice and turn
off.
3. Press key
[1]
, count number of indicator light flashes and write down.
4. Press key
[2]
, count number of indicator light flashes and write down.
5. Press key
[3]
, count number of indicator light flashes and write down.
6. Press key
[4]
, count number of indicator light flashes and write down.
NOTE: If code number is 0. Indicator light will not flash.
Factory Reset
Press and hold [
SET]
and [
POWER]
keys simultaneously for 3 seconds; the
indicator light shall remain on; then release keys.
Press the [
CC]
key and the light shall flash 3 times. Remote has now been
