E-10
Using the Monitor
2. Selecting a User
1. Press the SET button when turning off the device. The indicator or is blinking.
2. Select a user from user and user using the SET button. Press the
START button to turn off the device. After three minutes of non-operation,
the device will turn off automatically.
3. Adjusting the Built-in Clock Before Use
1. Press and hold the SET button until the year starts blinking.
2. Select the year using the button. Press the SET button to set the
current year and move to month/day selection. The date can be set
anywhere between the years 2010 and 2059.
3. Select the month using the button. Press the SET button to set the
current month and move to day selection.
4. Select the day using the button. Press the SET button to set the current
day and move to hour/minute selection.
5. Select the hour using the button. Press the SET button to set the
current hour and move to minute selection.
6. Select the minute using the button. Press the SET button to proceed
to “4. Applying the Cuff”.
q
Holding down the button will change the value continuously.
q
Pressing the START button will turn the device off anytime.
Notes: After three minutes of non-operation, the device will turn off automatically. When the clock has not been set,
--
/
--
is indicated
for the clock display. When removing the batteries, preset parameters (of clock, user and my C.P.G.) are reset.
Press and hold
SET
button
button
SET
button
SET
button
button
SET
SET
button
button
button
button
SET
button
Year
Month
Day
Hour
Minute
User or user
START
button
SET
button
Turn off
The operation proceeds to "
6.
The C.P.G Function Switch
".
