E-13
In Canada (Toll-Free): 1-800-463-5414
E-12
❤
LifeSource Health Line (Toll-Free): 1-888-726-9966
B L O O D P R E S S U R E R E C O R D
Name :
Age :
Weight :
DATE
AM
SYS/DIA
PULSE
PM
SYS/DIA PULSE
1/14
9:30 132/98
P 69 6:30 128/87 P 63
E X A M P L E
TROUBLESHOOTING
✓
Problem
Display is blank,
even when the
power is turned
on.
The device will
not measure.
Readings are too
high or too low.
Other
Probable cause
Battery is drained.
Battery terminals are
not in the correct
position.
The cuff is not fas-
tened properly.
You moved your arm
or body during the
measurement.
The Position of your
wrist is not correct.
The blood pressure
reading is different
from that measured
at a clinic or doctor’s
office.
Corrective action
Replace with a new battery.
Place the battery with
negative and positive ter-
minals matching those
indicated in the battery
compartment.
Fasten the cuff correctly.
Make sure you remain
very still and quiet during
the measurement.
Position your wrist so it
is level with your heart,
using an arm rest if
needed.
See Pg E-11 “Why
Measure Blood Pressure
at Home?”
Remove the battery.
Place back in correctly,
and try the measurement
again.
NOTE: If the actions described above do not solve the problem, con-
tact A&D Medical or Auto Control Medical at the numbers listed at
the bottom of these pages. Do not attempt to repair the device your-
self.
✓
UB328_0104 2/3/04 10:51 AM Page 16
