AND EK-1200i, Инструкция по эксплуатации

Страница: 22 / 43

20
8-5. Function list
Class Item
Param-
eter
Description
Š
0
Auto power-off disabled
poff
Auto power-off
1 Auto power-off enabled
Automatically
power off
0 Manual range change
Š 1 Automatic range change
2 Fixed to the lowest range
3 Fixed to the middle range
rng
Range
4 Fixed to the highest range
Range change
setting for EW-
i
series
0 Fast / sensitive
1
Š 2
3
Cond
Response
4
Slow / stable
Software filtering
0 Stable when within ± 0.5d/0.5s
Š 1 Stable when within ± 1d/0.5s
st-b
Stability band
width
2 Stable when within ± 2d/0.5s
Conditions to
turn on the
stability mark
0 Disabled trc
Zero tracking
Š 1 Enabled
Tracking zero
shift
Š 0 Point ( . ) pnt
Decimal point
1 Comma ( , )
Decimal separator
Š 0 Comparator disabled
1 Compares all data
2 Compares all stable data
3 Compares plus data > +4d
4 Compare stable plus data > +4d
5 Compares data > +4d or < -4d
Cp
Comparator mode
6
Compares stable data > +4d or < -4d
Conditions to
compare.
d = the minimum
display division
Š 0 Buzzer does not sound.
1 Buzzer sounds at LO.
2 Buzzer sounds at OK.
3 Buzzer sounds at OK and LO.
4 Buzzer sounds at HI.
5 Buzzer sounds at HI and LO.
6 Buzzer sounds at HI and OK.
bep
Buzzer output
7 Buzzer sounds at HI, OK and LO.
Buzzer sounds
according to
the comparator
results
0 Command and stream modes
Š 1 Command and PRINT key
2
Command, PRINT key and auto-print A
3
Command, PRINT key and auto-print B
prt
Data output
mode
4 Command mode only
Auto-print A:
+ data
Auto-print B:
+/- data
Š 0 No pause (general equipment) pUse
Data output pause 1
1.6 seconds (for AD-8121)
Interval between
continuous data
Š 0 No output
1 AD-8121 format
info
GLP output
2 General format
GLP
output format
Š 0 2400 bps
1 4800 bps
2 9600 bps
func
bps
Baud rate
3 1200 bps
Š Factory setting