— 13 —
STEP 11
Place Hood on Mounting Screws
Place the range hood’s key holes securely on the mounting screws and then tighten screws.
STEP 12
Install Damper
Place damper and damper gasket on top of ventilation hole, then connect using the four screws (included).
STEP 13
Install Ductwork
Attach ductwork to damper then duct tape the ductwork to make joints secure and air- tight. Do not install duct tape too
tight as this will stop the damper flaps from opening, which will overwork the motor and the unit will not function properly.
STEP 14
Install Lower Chimney
Place lower chimney on top of the Range hood.
