— 18 —
u
Unplug the unit from the AC outlet.
v
Remove five screws from the light panel, then
remove the light bulbs by popping them out.
w
Disconnect the light clip.
x
Reverse the removal procedures to install the new
light bulbs and plug the unit back in.
Be sure electrical power is off and all surfaces are cool
before cleaning or servicing any part of the hood.
Range Hood Body
• Do not use a steel wool pad; it will scratch the surface.
• To clean the stainless steel surface, use warm soapy
water or a stainless steel cleaner. Closely follow the
cleanser label instructions. DO NOT use corrosive or
abrasive detergents, ammonia products, abrasives or
oven cleaners. Always wipe the surface in the direction
of the grain.
Baffle Filters and Grease Trays
• The saturation of greasy residue in the fan and filters
may cause increased inflammability. Keep unit clean
and free of grease and residue build-up at all times to
prevent possible fires.
• Baffle filters and grease trays can be cleaned in a
standard dishwasher or by using a mild cleaner. DO
NOT use corrosive or abrasive detergents, ammonia
products, or oven cleaners.
• To remove, first drain and wipe all excess grease with
a dry paper towel. Grasp the baffle filter knobs and pull
them up, forward and out. Grasp the grease trays and
carefully lift them up and out of the hood track.
Maintenance
Replacing the Light Bulbs
Cleaning the Range Hood
• When cleaning is completed, replace the grease trays
and baffle filters as shown in Step 18 and Step 19.
