— 11 —
Installation
STEP 7b
Insert Motor Body Into Main Housing
The main housing and motor body are similar in size. We recommend the following steps to ensure a correct fit:
Figure 1
Figure 2
• Gently lower the main housing
• Insert the motor body (
A
) into the corner of the
main housing (
B
) (See Figure 1)
A
B
A
B
• Rotate the main housing (
B
) counter-clockwise at a
45° angle.
• Then tilt main housing (
B
) downwards until
motor body (
A
) is completely inside the main housing.
(See Figure 2)
• When the motor body (
A
) is inside the main housing (
B
),
rotate the main housing clockwise (
B
) back into place.
(See Figure 3)
Figure 3
A
B
