manualshive.com logo in svg

Anchor Perfectshade, Руководство по сборке

Поделиться
Скачать
Anchor Perfectshade Скачать руководство пользователя страница 6

Step 13

Remove fabric from bag.  Do not drag over concrete or 
other rough surfaces as this could damage the fabric.
Carry the fabric up the ladder to the ridge.
Throw the fabric over the ridge as shown in Figure 9.  Be 
certain that the fabric is right side up with the seams run-
ning perpendicular to the ridge.  You will know the fabric 
is right side up when the 

fl

 aps at the corners are on the 

top side.

Step 14

At this point you need to decide which corner will be 
the corner that will be your wire rope attachment corner.  
(Corner AA or DD) This corner will be the one where the 
wire rope loops are protruding from the corner of the 
fabric.  Let the fabric fall loosely down the hips, keeping 
it fairly centered on the ridge.  (Figure13)

Step 15

Start at the adjacent corner from the wire rope attach-
ment corner that does not have the web handles.  Pull 
the top down over the corner and insert the Corner Pin 
into the hole in the fabric.  Tuck the wire rope under the 
pin and then pull the corner 

fl

 ap down over the pin so 

that the corner pocket catches on the pin.  (See Figure 
10).

Step 16

Proceed to the corner diagonally opposite the 

fi

 rst cor-

ner.  Using short bursts, pull the fabric down over the 
corner using the web handles and attach as in Step 15.  
(See Figure 11).

Step 17

Proceed to the corner opposite the wire rope attachment 
corner.  Using the same technique as on Step 16, attach 
this corner.

Step 18

Proceed to the last corner (The wire rope attachment 
corner - See Figure 12).  Slide a pull rope from the instal-
lation kit (sold separately) through the web handles as 
shown in Figure 11.  Pull the corner down 
until the hole is caught over the corner 
pin.   (A second person on a ladder may be 
required to guide the pull rope so that the 
corner is more easily pulled into place.)  
Remove the pull rope.  Note that the cable 
loops will be hanging loose.

Step 19

Attach the eyebolts, neoprene washers and  
wing nuts.  (See Figure 13)  These will be 
attached to the two uprights adjacent to 
the wire rope attachment corner with the 
eyebolts facing the wire rope attachment 
corner.  Place one neoprene washer each 
side of the plate, neoprene side down, be-
tween the eyebolt and wing nut to prevent 
scratching of the frame 

fi

 nish.

Figure 9

Figure 10

Wire rope 
attachment 
corner with 
ends hanging 
loose

Seam running 
perpendicular 
to ridge.

Ridge

Corner Pin.

Corner Flap

Wire Rope

Figure 12

Wire rope 
attachment 
corner.

Web 
Handles

Figure 11

Wire Rope

Pull Rope

Wire rope 
attachment 
corner.

6

Содержание Perfectshade










Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды