1.
Slide a (14’4”) Side Eave Bar into each
eave connector opening of the four
Corner Fittings
until the snap buttons
engage. The rafter connector opening
of the Corner Fitting should be pointing
up and inwards, and the leg connector
opening should be pointing downwards.
2.
Then attach the other end of the Side
Eave Bars
to the eave connector
opening of a Mid-Leg Rafter Fitting until
the snap buttons engage. Be sure the
rafter connector opening of the Mid-Leg
Rafter Fitting is pointing inwards and
the leg connector opening is pointing
downwards. On the 30-foot side, there
will only be one Mid-Leg Rafter Fitting
that connects both Side Eave Bars.
3.
For the 40-foot side, slide each end of
a (9’4”) Side Eave Bar into the eave
connector openings of the Mid-Leg
Rafter Fittings
, connecting both ends.
Be sure the snap buttons engage.
(Repeat for structures longer than 40’)
You should now have a completed eave
section.
EAVE ASSEMBLY
30’
CLASSIC FRAME TENTS
|
ASSEMBLY INSTRUCTIONS
