6.3 Installation of the Room station
14
We recommend placing the unit
approximately 120cm-150cm (4’-5’)
above the ground.
Please note:
Avoid mounting the unit in places with
excessive amounts of oil, smoke, or high
temperatures, as these may have an
effect on the quality and life of the unit.
6.4 Code Setting Board on the Room
Station
Instructions
1.
The code number setting board for each room station corresponds to the entrance
station display. For example, if a room station was set to 1,2,3, then to call the room
station you would need to enter 1,2,3 on the entrance unit’s keypad, in order to call that
particular room station.
2.
Please note that these settings use binary numbers. A complete list of binary numbers
and their corresponding decimal (normal) numbers is included in Appendix A, for your
reference.
C
