3 |
P a g e
The system makes a good supply of drinking water each day. How much it will make depends primarily
on these things…
Feed water pressure limits
—pounds per square inch (psi) . . . . . . . . . . . . . . . . . . . . . . 40–100c
Feed water temperature limits
—minimum/maximum degrees F . . . . . . . . . . . . . . . . … 40– 90
Maximum Total Dissolved Solids (TDS)
—parts per million (ppm) . . . . . . . . . . . . . . . . 2000
Installation filter system Instructions
BEFORE YOU BEGIN Read these instructions completely and carefully.
• IMPORTANT — Save these instructions for local inspector’s use.
• IMPORTANT — Observe all governing codes and ordinances.
• Note to Installer – Be sure to leave these instructions with the Consumer.
• Note to Consumer – Keep these instructions for future reference.
• Proper installation is the responsibility of the installer.
• Product failure due to improper installation is not covered under the Warranty.
• A shutoff valve must be available or added near the installation point.
TOOLS AND MATERIALS REQUIRED FOR INSTALLATION
• Drill with 1/2″ Drill Bit (type as required) if mounting is needed for faucet
• Adjustable Open-End Wrenches
• Phillips and Flat Blade Screwdrivers
• Utility Knife
CONTENTS INCLUDED WITH PRODUCT
• Assembly and Tubing
• Product Literature (Owner’s Manual and Installation)
• Water Supply Inlet Parts Bag
• Faucet
• Pipe Thread Tape
