manualshive.com logo in svg

Anatomic SITT Zitzi Seabass Pro, Руководство пользователя

Поделиться
Скачать
Anatomic SITT Zitzi Seabass Pro Скачать руководство пользователя страница 31

31

User manual  Zitzi Seabass Pro

www.anatomicsitt.com  | +46 11 16 18 00

Parking brake 20-24”

Mounting parking brake for 20-24’’ wheel

The parking brake bracket is mounted as shown in the intended holes on the 
wheelchair side frame for the front transport brackets (A) with the supplied screws 
(B), washers (C), nuts (D) and nut caps (E). When using parking brake together 
with transport bracket (A), replace the parking brake screws with the transport 
bracket. Adjust the parking brake (F) if necessary by loosening the screws (G) on 
the pipe clamp (H) and then move the parking brake lever (F) forward or backward.
Tighten the screws (G) when desired position is reached. 

To use the parking brake

Lock the parking brake (F) by pushing the parking brake lever forward.
For best contact on the tire surface when using the parking brake, we recommend 
that the gap between the tire and parking brake (I) is 20 mm when the parking 
brake is in idle mode. 
Pull the parking brake lever back to release the parking brake.

Note!  

 

Make sure the parking brake does not tilt sideways after  

 

 adjustment.

Note! 

  

When using a transport bracket with parking brake, no washers 

are used. See page 47 of this manual for further information.

A

C

D

E

I 

G

H 

G

F

B

Parking brakes position 

on side frame 20-24’’

Содержание Zitzi Seabass Pro

























































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды