manualshive.com logo in svg

Anatomic SITT Zitzi Seabass Pro, Руководство пользователя

Поделиться
Скачать
Anatomic SITT Zitzi Seabass Pro Скачать руководство пользователя страница 30

30

User manual  Zitzi Seabass Pro

www.anatomicsitt.com  | +46 11 16 18 00

Mounting parking brake for 12-16’’ wheel

The parking brake bracket is mounted in the mounting plate on the side frame of 
the wheelchair with the supplied screws (A), spacers (B) and nuts (C).
If necessary, adjust the parking brake (D) by loosening the screw (E) and then move 
the parking brake (D) forward or backward in the track.
Tighten the screw (E) when desired position is reached.

To use the parking brake

Lock the parking brake (D) by pushing the parking brake lever forward.
For best contact on the tire surface when using the parking brake, we recommend 
that the gap between the tire and parking brake (F) is 20 mm when the parking 
brake is in idle mode. Pull the parking brake lever back to release the parking brake.

Parking brake 12-16”

Parking brakes position 

on side frame 12-16’’

A

F

B

C

D

E

Содержание Zitzi Seabass Pro

























































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды