Anatomic SITT Zitzi Flipper Pro Flex Скачать руководство пользователя страница 6 | Manualshive

Страница: 6 / 24

Anatomic SITT Zitzi Flipper Pro Flex Скачать руководство пользователя страница 6

6

User manual Zitzi Flipper Pro Flex

www.anatomicsitt.com | +46 11 16 18 00

Charging the battery

Connect the cable of the charger into a regular wall socket (220 V).

Then connect the cable of the charger into the side of the hand control.
You have to charge the battery for at least 24 hours the first time you use it.
It is very important that you never let the battery uncharge completely. If so, it may
be damage..

Charge the battery for 24 hours the first time.
Thereafter, charge it every night.
Never let the battery uncharge completely.

ACTUATOR (LIFT)

HAND CONTROL

Connecting the electronic box

When connecting the electronic box the actuator for the lift should be connected to
the box input marked 1.
At the option of electronic tilt function, the electronic box and the electronic
controller have to be replaced for this intended. The actuator for the tiltfunction then
should be connected to the box input marked 2.

1

2

ACTUATOR (TILT)

opyion

The connection for charger is

the side of the hand control.

«
...
4
5
6
7
8
...
»

Содержание Zitzi Flipper Pro Flex

























Отзывы:

Нет отзывов