12
User manual Zitzi Flipper Pro Flex
www.anatomicsitt.com | +46 11 16 18 00
Transportation kit
Mounting of the support bow
Mounted with screws and knobs as shown.
Loc-tite is used on the screws (A) during
assembly.
Mounting of the transportation kit
(front and rear)
Mounted with screws, washers and
nuts as shown.
Note that the loop of the back
bracket is pointing backwards.
Adjustment of the bow - Quick guide
•
Loosen the knobs on both
sides and pull out the support
bow to end position.
•
Make sure the knobs hooks
on the outer edge of the
track and then lock the
knobs.
A
A
Front transportation
kit
Rear transportation
kit
Note!
Support bow must always be in
lowest position and in contact with the
vehicles floor during transport.
Note!
The driving bow must always
bear against the seat system’s back
when transported in vehicles.