Analytic Systems VTC1015R Series Скачать руководство пользователя страница 3

3

IMPORTANT & SAFETY INSTRUCTIONS

1. SAVE THESE INSTRUCTIONS — This manual contains important safety and operating

instructions for this voltage converter.

2. Do not expose this voltage converter to rain or snow.
3. Use of an attachment not recommended or sold by the voltage converter manufacturer

may result in a risk of fire, electric shock, or injury to persons.

4. Do not disassemble this voltage converter; take it to a qualified serviceman when service

or repair is required.  Incorrect reassembly may result in a risk of electric shock or fire.

5. To reduce risk of electric shock, disconnect this voltage converter from it power source

before attempting any maintenance or cleaning.  Turning off the controls will not reduce

this risk.

6. CONVERTER LOCATION

i.

Never place converter directly above battery; gases from battery will corrode and

damage converter.

ii. Never allow battery acid to drip on converter when reading gravity or filling battery.

7. O/P CONNECTION PRECAUTIONS

Connect and disconnect DC output connections only after setting I/P power switch to the

off position.

Analytic Systems, does not recommend the use of the VTC1015R Series Voltage Converters 

in life support applications where failure or malfunction of this product can be reasonably 

expected to cause failure of the life support device or to significantly affect its safety or 

effectiveness.  Analytic Systems does not recommend the use of any of its products in direct 

patient care.

Examples of devices considered to be life support devices are neonatal oxygen analyzers, 

nerve stimulators (whether used for anesthesia, pain relief, or other purposes), autotransfu-

sion devices, blood pumps, defibrillators, arrhythmia detectors and alarms, pacemakers, 

hemodialysis systems, peritoneal dialysis systems, neonatal ventilator incubators, ventilators 

for both adults and infants, anesthesia ventilators, and infusion pumps as well as any other 

devices designated as “critical” by the U.S. FDA.

Содержание VTC1015R Series












Отзывы: