Analytic Systems IBC320, Руководство по установке и эксплуатации, Страница: 11 / 24

11
To save the configuration and exit Setup at any point in the process, press and hold the PRG
button for 3 seconds until you hear a one second beep.
Saving
To exit without saving, either press the On/Off button or do nothing. The charger will exit
the configuration mode without changing the stored configuration after 60 seconds elapses
without any button being pressed.
Exit without Saving
To restore the charger to its factory settings, press and hold both the PRG and EQL buttons for
10 seconds until you hear multiple beeps
Full Reset
Two additional adjustments can be made from the front panel. These are to select the charging
profile as well as the behavior of the charger at the conclusion of a recharge cycle.
Front Panel Adjustments
DEFAULT BATTERY TEMPERATURE INDICATORS
DEFAULT BATTERY TEMP 5C
POL
BAT
TEMP
AC COLD HOT WARM
BLINKING
AUTO BATTERY TEMP
DEFAULT BATTERY TEMP 21C
DEFAULT BATTERY TEMP 38C
POL
BAT
TEMP
AC COLD HOT WARM
POL
BAT
TEMP
AC COLD HOT WARM
POL
BAT
TEMP
AC COLD HOT WARM