Ax60 Carbon Dioxide Detector
Quick Start Guide - Hard Wired Option
Document ref: P0159-802-03
September 2015
Page 5 of 16
1.4
Package contents
Ax60 Carbon
Dioxide
Detector
(contents may
vary depending
on the package
ordered)
1 x Central Display
1 x power supply unit (PSU), either hard-wired type or plug-in type
depending on the package ordered
1 x PSU securing strip (for plug-in type PSU only)
1 to 4 x CO
2
Sensors (depending on the package ordered)
1 to 8 x CO
2
Alarms (depending on the package ordered)
1 x high-visibility optional beacon (if ordered)
Self-adhesive foam gaskets for use in rear-entry cable installations
1 x hazard labels, information labels, templates and Quick Start Guide
Consumables
(depending on
the package)
Cat5e UTP 24AWG PVC cable, length to suit installation
M13 cable glands 5—7mm (nylon), quantity to suit installation
Wall plugs and screws (fixing kits), quantity to suit installation
Tools (to be
provided by
installer)
PZ1 Pozi screwdriver; 3mm flat blade screwdriver
Cat5e cable jacket stripper; 24AWG wire stripper
Drill and drill bits for wall plugs; spirit level, tape measure, ruler
Small hammer, centre punch and pliers for removing knockouts
