Vostok2020
Analogue Solutions
7
MIDI to CV Converter / MIDI Note
Sequencer
This block serves two purposes.
THE MIDI CONVERTER
1/ A MIDI to CV converter.
This converts MIDI notes to the voltages needed to change the
pitch of the VCOs and trigger the envelopes (in a typical patch).
Pitch CV is 1V/Octave.
The Gate voltage is +5V.
VEL is MIDI velocity CV.
MIDI In and Thru do what you would expect.
To change MIDI channel simply press MIDI CHAN whilst playing a
few notes.
The new change is set (and stored) as the channel or the last
MIDI message received.
THE NOTE SEQUENCER
The Note sequencer is a simple yet highly e
ff
ective note loop
sequencer. The sequencer will record and store the last MIDI note
received. It stores 16 notes in total, and will then loop round and
overwrite starting from the beginning.
Each time a new MIDI note is played (to the MIDI In socket) the
sequencer stores the note and advances the sequencer one step.
The sequencer is always listening for new notes and will store
them as they come in, into the 16 note loop - even whilst the
sequencer is running. However it will ignore input notes when
Transpose is on.
Содержание VOSTOK 2020
Страница 1: ...Vostok2020 Analogue Solutions 1...
Страница 5: ...Vostok2020 Analogue Solutions 5 Panel Overview...