Vostok2020
Analogue Solutions
12
CV / Gate Sequencer
This is an eight step analogue CV
sequencer. It loops around eight
steps.
RESET
A gate or voltage into here will
reset the sequencer back to step
1.
CLOCK
Clock Input! Use LFO Square, or
NOTE0 from the MIDI Converter
to sync the sequencer.
CV
Control Voltage Out.
GATE
Gate out - patch to envelopes
(typically.)
FLIPPED GATE
This is a secondary gate output.
It goes high when the normal
gate above is low. They do the
opposite to each other. Really
good for doing syncopated style
rhythms (or, ‘riddims’.)
STEP
This push button is used to
manually advance the sequencer.
GATE ON/OFF
Use this push button to program the Gate pattern. To program in first disable any sync so the
sequencer is not running.
To toggle on / o
ff
the gate for the active step, press this button. The LED will show whether Gate
is on or o
ff
for this step.
Press Step to advance to the next step and change the gate again should you wish.
Содержание VOSTOK 2020
Страница 1: ...Vostok2020 Analogue Solutions 1...
Страница 5: ...Vostok2020 Analogue Solutions 5 Panel Overview...