SYNC SOURCE
-and syncing to MIDI
The sequencer can be clocked from three different sources;
LFO
Internal LFO becomes the clock source.
NOTE0 (MIDI SYNC)
MIDI Note 000 is used to step / clock the sequencer. Each time that note us received
the sequencer will clock one step.
This is the best way to sync with your DAW, since you can program a string of notes
however you wish:
16ths
8ths
Some rhythmic pattern.
It also allows you to stop (mute) the sequencer mid-Song, and restart at will. Also to
change the clock pattern, like half the speed, for example - all things you cannot do with
MIDI Sync.
EXT
If a clock signal or LFO is fed into the EXT socket on the rear panel then that becomes
the source.
STOP
Stops the sequencer!
Analogue Solutions 2021 02
