OPS200 - Ref. OPS200
Rear Panel Description
RS-232 communication port
on a DB9 female connector
Power supply: IEC/EN/UL/CSA
60950-1, internal, autoswitchable
Universal Analog Computer/TV/HDTV inputs #1 to #5
SD/HD-SDI/3G-SDI inputs #1 & #2: female BNC
Prelist and Main Audio Output
IP-LAN connector
3.5mm Jack Stereo
Connector input (unba-
lanced)
MCO Male Connector for unba-
lanced inputs #5 to #6
DVI #1 and DVI #2: Unbalanced
Input #7 and AUX: Balanced
A U D I O I N P U T S C O N N E C T I O N S
H O M E M E N U
The Home Menu is the system’s top level menu, from which all others menus can be
accessed. To access a menu, press the [
MENU
] button. To navigate in the Home
Menu, please use the knob. To confirm, please use the [
ENTER
] button. You can also
return to the Home Menu by pressing the [
EXIT
] button.
-
INPUT:
select to configure the 1 individual input types and resolutions
-
MAIN OUT:
select to set Format and Rate
-
PREVIEW OUT:
select to Format and Rate
-
PRESET:
select to store and use presets
-
IMAGE:
select to change source image settings of an input
-
KEYING/TITLING:
select to access keying and titling controls and parameters
-
LAYER:
select to adjust layer size, position, border, transparency or transitions
-
LOGOS/FRAMES:
select to store (record), manage logos and frames
-
AUDIO:
select to access all audio input and output parameters
-
CONTROL:
select to access device software information, LAN settings, reset factory
settings, amongst other user oriented functions (see next page)
-
VIRTUAL T-Bar:
select to access the Virtual T-Bar
AUDIO OUTPUT
3.5mm Jack Stereo Connector
Inputs #1 to #4:
Unbalanced connection
MCO Male Connectors *
Inputs #5 to #6:
Unbalanced connection
Inputs DVI #1 & #2:
Unbalanced connection
Main Output:
Balanced connection
Input #7 (AUX):
Balanced connection
4
L+
L-
R+
R-
BALANCED
L+
R+
L-
R-
GROUND(S)
Right
Left
Ground
5
6
L
R
L
R
UNBALANCED
LEFT
LEFT
RIGHT
RIGHT
GROUND(S)
Input #5
Input #6
H O W TO A D J U S T A S O U R C E ?
IMAGE
(A3)
HOME MENU (extract)
Auto Centering
(R1)
Blanking Adjust
(R2)
Cropping
(R2)
Optimize
(R1)
Under/Over
(R3)
Aspect IN
Aspect OUT
Colorimetry
Advanced
(R2)
2:2 Pulldown
(R7)
3:2 Pulldown
(R8)
Reset settings
Force 4:3
(R9)
H position
H position
V position
V position
H size
H size
Phase
Underscan
Native
LetterBox_2_35
Centered
Contrast
Red Level
(R5)
Component Level
(R2)
Pillar Box
1_1
Hue
(R6)
Blue Level
(R5)
Motion Correct.
(R11)
*
V size...
V size...
H Total
Overscan
LetterBox_1_78
Full screen
Brightness
Anamorphic
Cropped
Color
Green Level
(R5)
(A3) displayed when an
input is active
(R1) Analog Computer Input
(R2) Analog Input
(R3) Video Input
(R4) EDTV/HDTV Input
(R5) RGB or YUV or YC or CV
(R6) NTSC Input
(R7) Interlaced 50 Hz
(R8) Interlaced 60 Hz
(R9) SDTV
The Menu allows to improve the thres-
hold of the comb filter.
0% means no adjustments and 100%
is the max. The setting is manual with
a visual correction.
The result is the removal of the aliasing
in the moving picture.
*
Motion Correction
DVI connectors: DVI-D inputs #1 and #2 on the DVI-I
digital pins, and Universal Analog inputs #6 & #7 on
the DVI-I analog pins. Use the included break-in cable.
Outputs #1 & #2: female HD15, DVI-I
(simultaneous analog and digital outputs)
* A set of 3 audio 10-pin screw terminals is provided with the device. The figure repre
-
sents the lower or upper connector.
