CENTRIX™ & EVENTIX™
Chapter 3 : OPERATING MODE (continued)
PAGE 27
3-2. OPERATING WITH THE FRONT PANEL OF THE EVENTIX
™
IMPORTANT:
The EVENTIX
™
can be used in two different modes: the
MIXER MODE
and the
MATRIX MODE
.
The
MIXER MODE
allows switching seamlessly, fading and titling between all the inputs. The
MATRIX MODE
allows to display the inputs onto two independents display devices. The default
mode is the
MIXER MODE
. To set the EVENTIX
™
in
MATRIX MODE
, please refer to the
section: 3-2-2.
3-2-1. OPERATING IN MIXER MODE
•
SETTINGS
c
We recommend resetting the
EVENTIX
™
device to its default values, with the LCD menu (
CONTROL >
default value > yes
) before proceeding.
d
Verify the
EVENTIX
™
is set in
MIXER
MODE
with the LCD menu (
MODE > mixer mode).
e
Select the
input type
connected to the inputs with the LCD menu (
INPUT > input type
).
f
Select the
output sync
according to your display device with the LCD menu (
OUTPUT > output sync
).
g
Select the
output rate
mode with the LCD menu
(
OUTPUT > output rate
).
h
Select one of the
output formats
with the LCD menu (
OUTPUT > output format
).
NOTE:
For fixed pixels display device (DMD, LCD, PLASMA…), always select the output format corresponding
to the native resolution of your display device. Thus, the display device will not have to scale the image
and the result will be better.
i
Select the
type of screen
(4/3 or 16/9) with the LCD menu (
OUTPUT > type of screen > 4/3 or 16/9
),
according to your wall mounted projection screen shape.
•
INPUT SELECTION
c
Pre-select an input with the
INPUT SELECT
keys. The key starts blinking.
d
Select an effect with the
EFFECT
keys.
e
Press on
TAKE
to do the transition.
Figure 29
NOTE:
According to the selected effect the
TAKE
key may turn ON or blink during the transition. When the
TAKE
key is turned ON you should wait for the end of the transition before doing another selection. When
it is blinking, you should press the
TAKE
key to stop the transition.
www.liveline.be
Содержание CentriX CTX8022
Страница 2: ...www liveline be ...
