Figure 6: SSM2518 Stand Alone Mode Configuration
Figure 7: SSM2518 I2C Mode Configuration using ADUSB2 Dongle
Section 4 – GUI / ADUSB2 Installation:
A graphical user interface for the SSM2518 has been created in the Analog Devices, Inc. SigmaStudio environment.
SigmaStudio must first be downloaded and installed on the user’s PC from the following link:
http://www.analog.com/en/audiovideo-products/audio-signal-
processors/products/overview/cu_over_sigmastudio_graphical_dev_tool_overview/resources/fca.html
