Switch Settings
2-14
ADSP-21375 EZ-KIT Lite Evaluation System Manual
ELVIS Function Generator Configuration Switch
(SW13)
The function generator configuration switch (
SW13
) controls which signals
connect to the left and right input signals of the audio interface. The
SW13
switch is used only when the board connects to the ELVIS station (see
). Each channel must have only one signal
selected at a time, as described in
.
B
6 (
OFF
)
AMP_RIGHT_IN
B
7 (
OFF
)
LEFT_OUT
B
8 (
OFF
)
RIGHT_OUT
1 Bold typeface denotes the default settings.
Table 2-8. ELVIS Function Generator Configuration Switch (SW13)
Channel
Switch Position
Audio Signal
AMP_LEFT_IN
1 (
ON
1
)
1 Bold typeface denotes the default settings.
LEFT_IN
AMP_RIGHT_IN
2 (
ON
)
RIGHT_IN
AMP_LEFT_IN
3 (
OFF
)
DAC0
AMP_RIGHT_IN
4 (
OFF
)
DAC1
AMP_LEFT_IN
5 (
OFF
)
FUNCT_OUT
AMP_RIGHT_IN
6 (
OFF
)
FUNCT_OUT
Table 2-7. Oscilloscope Configuration Switch (SW1) (Cont’d)
Channel
Switch Position
Audio Circuit Signal
