UG-260
Evaluation Board User Guide
Rev. 0 | Page 8 of 20
5.
Connect the ISEB to the ADXRS450/ADXRS453 satellite
using the 18-inch, 20-pin ribbon cable. This cable is keyed
to prevent inserting it backward and causing damage to the
system.
09
75
1-
0
16
6.
Connect the
ADXRS450
/
ADXRS453
satellite to the opposite
end of the ribbon cable.
The inertial sensor evaluation system should now be set up and
ready to use and should resemble the setup shown in Figure 17.
Figure 17. Fully Assembled Evaluation Kit
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
