Analog Devices EVAL-ADV7281MEBZ, Руководство по установке, Страница: 6 / 12

ADV7282-M Installation Guide
Rev. A, March 2013 6
2. SETTING UP THE ADV7282-M EVALUATION BOARD
The Analog Devices (ADI) DVP Eval program and ADV7282-M script files are needed to operate the ADV7282-M evaluation board. The
DVP Eval program and ADV7282-M script files are available on an ADI File Transfer Protocol (FTP) site.
The following setup process is recommended, and is described in detail in Section
2.1 to Section 2.6 .
1. Download and install an FTP client.
2. Download the DVP Eval program and ADV7282-M script files from the ADI FTP site.
3. Install the DVP Eval program.
4. Load the ADV7282-M script files.
5. Power up the ADV7282-M evaluation board.
6. Program the ADV7282-M evaluation board.
2.1.
DOWNLOAD AND INSTALL AN FTP CLIENT
Download and install an FTP client such as FileZilla in order to access the ADI FTP site.
1. Go to the http://filezilla-project.org/download.php?type=client website.
2. Download the FileZilla FTP client .exe installation file.
3. When the download is completed, run the .exe installation file and follow the onscreen instructions.
2.2.
DOWNLOAD ADV7282-M FILES FROM ADI FTP SITE
The DVP Eval program and ADV7282-M script files are available on the ADI FTP site.
1. Open the FTP client, for example, FileZilla.
2. A quick connect bar appears near the top of the FileZilla client window. Enter the following information. (Note that the boxes
are case sensitive.)
a. In the
Host
box, enter
ftp.analog.com
.
b. In the Username box, enter adv728x .
c. In the Password box enter 1dN62jy .
d. Leave the
Port
box blank.
3. Press the
Quickconnect
button.
FileZilla then shows two panes (refer to Figure 2 ). The left pane displays the Local Site Pane (that is, your computer). The right
pane displays the Remote Site Pane (that is, the ADI FTP site).