UG-1870
Rev. A | Page 3 of 15
EVALUATION BOARD QUICK START GUIDE
To quickly evaluate the
ADCs,
take the following steps:
1.
Download and install the
software from the
AD7606C-18 or AD7606C-16 product page or the ACE
software page. When installing the ACE software, ensure that
the
is disconnected from the USB port of the PC.
Restart the PC after the installation process completes. For
complete software installation instructions, see the
Software Installation section.
2.
Ensure that the link options are configured as detailed in
Table 2.
3.
Connect the SDP-H1 to the EVAL-AD7606CFMCZ. By
default, the power for the EVAL-AD7606CFMCZ is
supplied by the SDP-H1. See the Power Supplies section
for the available power options.
4.
Connect the SDP-H1 to the 12 V supply (included in the
SDP-H1 kit) and to the PC via the USB cable. If prompted
by the operating system, choose to automatically search for
the drivers for the SDP-H1.
5.
Launch the ACE software from the following location:
C:\Program Files
(x86)\Analog Devices
\
ACE
.
6.
Connect an input signal via the Channel 1 to Channel 8
terminal blocks or the Subminiature Version B (SMB)
connectors, J1 to J8.
