EVAL-AD7405FMCZ User Guide
UG-690
GENERATING
A WAVEFORM ANALYSIS
REPORT
Figure 16 illustrates the tab used for waveform capture.
Click
Single Capture
or
Continuous Capture
(labeled 1 in
Figure 16) to capture a number of samples from the ADC and
graph the resulting waveform.
Graph controls (labeled 2 in Figure 16) are located above the
graph and may be used pan and zoom into particular areas of
the graph (see the Graph Tools section and Figure 15 for more
information).
The
Waveform Analysis
area (labeled 3 in Figure 16)
shows statistics pertaining to the captured waveform such
as maximum, minimum, and mean amplitudes and signal
frequency.
Figure 16. Waveform Capture Tab
1
2
3
12304-
016
Rev. 0 | Page 15 of 20