UG-624
EVAL-AD5161DBZ User Guide
Rev. 0 | Page 6 of 16
EVALUATION BOARD SOFTWARE
INSTALLING THE SOFTWARE
The
EVAL-AD5161DBZ
kit includes evaluation board software
provided on a CD. The software is compatible with Windows® XP,
Windows Vista, and Windows 7 (both 32-bit and 64-bit versions).
Install the software before connecting the
SDP board
to the
USB port of the PC to ensure that the SDP board is recognized
when it is connected to the PC.
1.
Start the Windows operating system and insert the CD.
2.
The installation software opens automatically. If it does
not, run the
setup.exe
file from the CD.
3.
After the installation is complete, power up the evaluation
board as described in the Power Supplies section.
4.
Connect the
EVAL-AD5161DBZ
and EVAL-MB-LV-SDZ to
the SDP board and the SDP board to the PC.
5.
When the software detects the evaluation board, follow the
instructions that appear to finalize the installation.
RUNNING THE SOFTWARE
To run the program, do the following:
1.
Click
Start
>
All Programs
>
Analog Devices
>
AD5161
>
AD5161 Eval Board
. (To uninstall the program, click
Start
>
Control Panel
>
Add or Remove Programs
>
AD5161 Eval Board
.)
2.
If the SDP board is not connected to the USB port when
the software is launched, a connectivity error displays (see
Figure 7). If a connectivity error is displayed, connect the
evaluation board to the USB port of the PC and wait a few
seconds, and then click
Rescan
and follow the instructions
that appear on-screen.
11876-
007
Figure 7. Pop-Up Window Error
The main window of the
EVAL-AD5161DBZ
software then
opens, as shown in Figure 8.
11876-
008
Figure 8.
EVAL-AD5161DBZ
Software Main Window, Visual Control Tab
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
