UG-1820
Rev. 0 | Page 14 of 24
Device Error
The
Device Error
indicator (Label 21 in Figure 18) illuminates
in the
Voltage Waveform
tab and
Ch Waveform
tab when a
cyclic redundancy check (CRC) error or an error in the ADC is
detected. More specific information on the error can be found
by clicking
Summary
in the
Configuration
tab (Label 11 in
Analysis Input
The
Noise Analysis
box shows the analysis of the input selected
via the analysis control (Label 22 in Figure 18).
Noise Analysis
The noise analysis area (Label 23 in Figure 18) displays the
results of the noise analysis for the selected analysis input,
including both noise and resolution measurements.
Input Range
The
Range
box (Label 24 in Figure 18) is an indicator in quick
start mode. The value is selected in the
Inputs
area on the
Configuration
tab (Label 1 in Figure 16). In advanced mode,
Range
is a control that allows the user to select an input range
for the input chosen for noise analysis.
