Analog Devices EV-ADF5904SD2Z, Руководство пользователя

Страница: 4 / 14

UG-791 EV-ADF5904SD2Z User Guide
EVALUATION BOARD HARDWARE
The evaluation board requires an SDP-S motherboard to
program the device. The SDP-S board is not included and must
be purchased separately. The
EV-ADF5904SD2Z schematics are
shown in Figure 5 to Figure 9. The top layer and assembly layout
are shown in Figure 10.
POWER SUPPLIES
The evaluation board is powered via one external supply, 5 V
connected as described in the Quick Start Guide section.
INPUT SIGNALS
The LO input pin and the Rx input pins on the ADF5904
contain a dc bias voltage; the inputs must be ac-coupled to the
evaluation board.
OUTPUT SIGNALS
The baseband outputs from the ADF5904 contain dc bias
voltages and are available on the J3 to J11 output SMAs.
Table 1. Baseband Output Mapping
Rx Input Baseband Outputs
RF1IN J3, J4
RF2IN J6, J7
RF3IN J8, J9
RF4IN J10, J11
DEFAULT OPERATION
All components necessary for ADF5904 operation are inserted
on the board.
Rev. 0 | Page 4 of 14