ADT7476
Rev. B | Page 6 of 72
ABSOLUTE MAXIMUM RATINGS
Table 2.
Parameter Rating
Positive Supply Voltage (V
CC
) 3.6
V
Maximum Voltage on +12V
IN
Pin
16 V
Maximum Voltage on +5V
IN
Pin 6.25V
Maximum Voltage on All Open-Drain Outputs
3.6 V
Voltage on Any Input or Output Pin
−0.3 V to +4.2 V
Input Current at Any Pin
±5 mA
Package Input Current
±20 mA
Maximum Junction Temperature (T
J MAX
) 150°C
Storage Temperature Range
−65°C to +150°C
Lead Temperature, Soldering
IR Reflow Peak Temperature
220°C
Pb-Free Peak Temperature
260°C
Lead Temperature (Soldering, 10 sec)
300°C
ESD Rating
1500 V
Stresses above those listed under Absolute Maximum Ratings
may cause permanent damage to the device. This is a stress
rating only; functional operation of the device at these or any
other conditions above those indicated in the operational
section of this specification is not implied. Exposure to absolute
maximum rating conditions for extended periods may affect
device reliability.
THERMAL RESISTANCE
θ
JA
is specified for the worst-case conditions, that is, a device
soldered in a circuit board for surface-mount packages.
Table 3. Thermal Resistance
Package Type
θ
JA
θ
JC
Unit
24-Lead QSOP
122
31.25
°C/W
ESD CAUTION
www.BDTIC.com/ADI
