Distributor of Analog Devices Inc.: Excellent Integrated System Limited
Datasheet of ADZS-BFSHUSB-EZEXT - BOARD DAUGHTER EZ EXTENDER
Contact us: [email protected] Website: www.integrated-circuit.com
Regulatory Compliance
The Blackfin/SHARC USB EZ-Extender is designed to be used solely in a
laboratory environment. The board is not intended for use as a consumer
end product or as a portion of a consumer end product. The board is an
open system design, which does not include a shielded enclosure and
therefore may cause interference to other electrical devices in close prox-
imity. This board should not be used in or near any medical equipment or
RF devices.
The Blackfin/SHARC USB EZ-Extender is currently being processed for
certification that it complies with the essential requirements of the Euro-
pean EMC directive 89/336/EEC amended by 93/68/EEC and therefore
carries the “CE” mark.
This evaluation system contains ESD (electrostatic discharge) sensitive
devices. Electrostatic charges readily accumulate on the human body and
equipment and can discharge without detection. Permanent damage may
occur on devices subjected to high-energy discharges. Proper ESD precau-
tions are recommended to avoid performance degradation or loss of func-
tionality. Store unused boards in the protective shipping package.
4 / 29
4 / 29
