Analog Devices ADZS-AD2428MINI, Руководство пользователя

Страница: 17 / 19

Local Power Mode()
The ADZS-AD2428MINI supports multiple modes of the AD2428. Local Power Mode is used for when configur-
ing the AD2428 as a Master node or as a Local Power Slave. In Local Power Mode, 12V is supplied to the LT8620
switching supply from P1 or P2 and it bucked down to 8.5V.
To configure the ADZS-AD2428MINI into Local Power Mode, set the jumpers according to the table below:
Jumper Configuration
P5 Jumper Removed
P6 PIN 2-3
P7 Jumper Removed
P8 PIN 1-2
Bus Power Mode()
The ADZS-AD2428MINI supports multiple modes of the AD2428. Bus Power Mode is used for when configuring
the AD2428 as a Bus Power Slave node. In this mode, the LT8620 is disabled.
To configure the ADZS-AD2428MINI into Bus Power Mode, set the jumpers according to the table below:
Jumper Configuration
P5 PIN 1-2
P6 PIN 1-2
P7 PIN 1-2
P8 Jumper Removed
LEDs
This section describes the on-board LEDs. The LED Locations figure shows the LED locations.
Jumpers
3–8 ADZS-AD2428MINI Manual