ADSP-TS201S EZ-KIT Lite Evaluation System Manual
xi
Preface
• Flash memory
D
512K main flash memory
• USB debugging interface
• Interface connectors
D
14-pin emulator connector for JTAG interface
D
Low Voltage Differential Signaling (LVDS) link ports via
RJ-45 connectors
D
Expansion interface connectors
• General-purpose IO
D
4 push button flags (two for each processor)
D
2 push button interrupts (one for each processor)
D
4 LED FLAG outputs (two for each processor)
• Analog Devices ADP3331, ADP3336, ADP1864, ADP1821, and
ADP1823 voltage regulators
The EZ-KIT Lite board contains two external memories: flash memory
and SDRAM. The flash memory can be used to store user-specific boot
code. By configuring the boot mode switch (
SW2
) and programming the
flash memory, the board can run as a stand-alone unit. The SDRAM is
shared by both processors and can be used to store data external to the
processors. For more information, see
.
The EZ-KIT Lite board contains an audio interface, facilitating creation
of audio signal processing applications.
Additionally, the EZ-KIT Lite board provides expansion connectors,
allowing you to connect to the processor’s external port (EP).
Содержание ADSP-TS201S EZ-KIT Lite
Страница 4: ......
Страница 60: ...Power Supply Specifications 2 24 ADSP TS201S EZ KIT Lite Evaluation System Manual...
Страница 72: ...A 12 ADSP TS201S EZ KIT Lite Evaluation System Manual...