UG-1674
Rev. 0 | Page 13 of 13
ORDERING INFORMATION
BILL OF MATERIALS
Table 4.
Reference Designator
Description
Manufacturer
Part Number
C4, C5
Capacitors, ceramic, 1 μF
AVX
04026D105KAT2A
C6, C7
Capacitors, ceramic, 0.01 μF
TDK
CGA2B3X7S2A103K050BB
C8, C9
Capacitors, ceramic, not installed
AVX Corporation
08051C102KAT2A
C10, C11
Multilayer capacitors, ceramic, 100 pF
TDK KEMET
C1005NP01H101J050BA
C12, C13
Capacitors, ceramic, 0.39 nF
C0603C391J1GAC7867
C14, C15
Capacitors, ceramic, 1000 pF
TDK
C1608C0G2A102J
P1, P2
Connectors, PCB header, vertical, dual row, 4-pin,
2 mm pitch
Molex 87759-0414
P3, P4
Connectors, PCB header, vertical, dual row, 24-pin,
2.54 mm pitch
SAMTEC INC.
TSM-112-01-L-DV
R1, R2
Resistors, thick film chip, 100 kΩ
Multicomp (SPC)
MC 0.0625W 0402 1% 100K
R3, R4, R17
Resistors, thick film chip, 0 Ω
Multicomp (SPC)
MC00625W040210R
R5, R6, R9, R10, R13, R14
Resistors, surface-mount device (SMD) chip jumper, 0 Ω
Panasonic
ERJ-2GE0R00X
R7, R8
Resistors, thick film chip, not installed
Stachpole Electronics, Inc.
RMCF0805FT3R90
R11, R12
Resistors, film SMD, 0 Ω
Panasonic
ERJ-3GEY0R00V
R15, R16
Resistors, thick film chip, 3.9 Ω
Panasonic
ERJ-2GEJ3R9X
J5, J6
Connectors, SMA jack edge, not installed
SRI Connector Gage Co.
21-146-1000-01
J1 RFIN, J2 RFOUT
Connectors, SMA jack edge
SRI Connector Gage Co.
21-146-1000-01
U1
40 W, 0.9 GHz to 1.6 GHz, GaN power amplifier
Analog Devices
Not Applicable
Aluminum heatsink 2.51 in × 1.91 in
Not applicable
Not applicable
ESD Caution
ESD (electrostatic discharge) sensitive device
. Charged devices and circuit boards can discharge without detection. Although this product features patented or proprietary protection
circuitry, damage may occur on devices subjected to high energy ESD. Therefore, proper ESD precautions should be taken to avoid performance degradation or loss of functionality.
Legal Terms and Conditions
By using the evaluation board discussed herein (together with any tools, components documentation or support materials, the “Evaluation Board”), you are agreeing to be bound by the terms and conditions
set forth below (“Agreement”) unless you have purchased the Evaluation Board, in which case the Analog Devices Standard Terms and Conditions of Sale shall govern. Do not use the Evaluation Board until you
have read and agreed to the Agreement. Your use of the Evaluation Board shall signify your acceptance of the Agreement. This Agreement is made by and between you (“Customer”) and Analog Devices, Inc.
(“ADI”), with its principal place of business at One Technology Way, Norwood, MA 02062, USA. Subject to the terms and conditions of the Agreement, ADI hereby grants to Customer a free, limited, personal,
temporary, non-exclusive, non-sublicensable, non-transferable license to use the Evaluation Board FOR EVALUATION PURPOSES ONLY. Customer understands and agrees that the Evaluation Board is provided
for the sole and exclusive purpose referenced above, and agrees not to use the Evaluation Board for any other purpose. Furthermore, the license granted is expressly made subject to the following additional
limitations: Customer shall not (i) rent, lease, display, sell, transfer, assign, sublicense, or distribute the Evaluation Board; and (ii) permit any Third Party to access the Evaluation Board. As used herein, the term
“Third Party” includes any entity other than ADI, Customer, their employees, affiliates and in-house consultants. The Evaluation Board is NOT sold to Customer; all rights not expressly granted herein, including
ownership of the Evaluation Board, are reserved by ADI. CONFIDENTIALITY. This Agreement and the Evaluation Board shall all be considered the confidential and proprietary information of ADI. Customer may
not disclose or transfer any portion of the Evaluation Board to any other party for any reason. Upon discontinuation of use of the Evaluation Board or termination of this Agreement, Customer agrees to
promptly return the Evaluation Board to ADI. ADDITIONAL RESTRICTIONS. Customer may not disassemble, decompile or reverse engineer chips on the Evaluation Board. Customer shall inform ADI of any
occurred damages or any modifications or alterations it makes to the Evaluation Board, including but not limited to soldering or any other activity that affects the material content of the Evaluation Board.
Modifications to the Evaluation Board must comply with applicable law, including but not limited to the RoHS Directive. TERMINATION. ADI may terminate this Agreement at any time upon giving written
notice to Customer. Customer agrees to return to ADI the Evaluation Board at that time. LIMITATION OF LIABILITY. THE EVALUATION BOARD PROVIDED HEREUNDER IS PROVIDED “AS IS” AND ADI MAKES NO
WARRANTIES OR REPRESENTATIONS OF ANY KIND WITH RESPECT TO IT. ADI SPECIFICALLY DISCLAIMS ANY REPRESENTATIONS, ENDORSEMENTS, GUARANTEES, OR WARRANTIES, EXPRESS OR IMPLIED,
RELATED TO THE EVALUATION BOARD INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTY OF MERCHANTABILITY, TITLE, FITNESS FOR A PARTICULAR PURPOSE OR NONINFRINGEMENT OF
INTELLECTUAL PROPERTY RIGHTS. IN NO EVENT WILL ADI AND ITS LICENSORS BE LIABLE FOR ANY INCIDENTAL, SPECIAL, INDIRECT, OR CONSEQUENTIAL DAMAGES RESULTING FROM CUSTOMER’S
POSSESSION OR USE OF THE EVALUATION BOARD, INCLUDING BUT NOT LIMITED TO LOST PROFITS, DELAY COSTS, LABOR COSTS OR LOSS OF GOODWILL. ADI’S TOTAL LIABILITY FROM ANY AND ALL CAUSES
SHALL BE LIMITED TO THE AMOUNT OF ONE HUNDRED US DOLLARS ($100.00). EXPORT. Customer agrees that it will not directly or indirectly export the Evaluation Board to another country, and that it will
comply with all applicable United States federal laws and regulations relating to exports. GOVERNING LAW. This Agreement shall be governed by and construed in accordance with the substantive laws of the
Commonwealth of Massachusetts (excluding conflict of law rules). Any legal action regarding this Agreement will be heard in the state or federal courts having jurisdiction in Suffolk County, Massachusetts, and
Customer hereby submits to the personal jurisdiction and venue of such courts. The United Nations Convention on Contracts for the International Sale of Goods shall not apply to this Agreement and is
expressly disclaimed.
©2020 Analog Devices, Inc. All rights reserved. Trademarks and
registered trademarks are the property of their respective owners.
UG22011-10/20(0)
