UG-1571
One
Technology
Way
•
P.O.
Box
9106
•
Norwood,
MA
02062-9106,
U.S.A.
•
Tel:
781.329.4700
•
Fax:
781.461.3113
•
www.analog.com
Evaluating the
Advanced Battery Management PMIC with Ultralow I
Q
Buck
and Buck Boost
PLEASE SEE THE LAST PAGE FOR AN IMPORTANT
WARNING AND LEGAL TERMS AND CONDITIONS.
Rev. 0 | Page 1 of 18
FEATURES
VBUS input voltage: 4.0 V to 6.5 V
Fully featured evaluation board for the
Evaluation software and installation CD included
Simple device measurements and demonstrable with
A voltage power supply
A battery or battery simulator
A voltage meter
Load resistors or an electrical load
EQUIPMENT NEEDED
USB to I
2
(not included in the
evaluation kit and must be ordered separately)
Li-ion battery or battery simulator
PC running Windows® 10 operating system
DOCUMENTS NEEDED
ADP5360 data sheet
SOFTWARE NEEDED
GENERAL DESCRIPTION
This user guide describes the hardware and software used in the
ADP5360CB-EVALZ evaluation board and includes detailed
schematics and printed circuit board (PCB) layouts.
The
includes a high performance linear regulator for
single Li-ion/Li-ion battery charging, ultralow quiescent current
fuel gauge and battery protection circuit, an ultralow quiescent
buck and a buck boost switching regulator, and a supervisory
circuit.
The ADP5360CB-EVALZ evaluation board supports an
external USB dongle connection and the graphic user interface
(GUI) software allows the user to evaluate the comprehensive
functionalities provided by the I
2
C interface.
operates over the −40°C to +85°C junction
temperature range and is available in a 32-ball, 2.56 mm ×
2.56 mm WLCSP.
More information on the
data sheet, available from
, which must be
consulted in conjunction with this evaluation board user guide.
EVALUATION BOARD PHOTOGRAPH
20603
-001
Figure 1.
