Analog Devices ADMV1013-EVALZ, Руководство пользователя

Страница: 12 / 19

UG-1461 ADMV1013-EVALZ User Guide
Rev. B | Page 12 of 19
TEST RESULTS
The following results test results of the ADMV1013-EVALZ
evaluation board are the expected results. V
CTRL
= 1800 mV is used
for both the IF results and the I/Q results.
IF RESULTS
Jumper J1 to Jumper J4 are excluded from the IF measurements
that follow. The hybrids and evaluation board RF traces have not
been de-embedded.
Figure 17 shows the results of an IF input of 1000 MHz at
−10 dBm, single tone mixed, with a 7 GHz LO at 0 dBm to an
RF output of 29 GHz for upper sideband settings.
See Figure 18 for the graphical user interface (GUI) settings that
produce the results shown in Figure 17.
172
68
-0
17
Figure 17. ADMV1013 Results for IF Mode with Upper Sideband Settings
17
26
8
-01
8
Figure 18. ADMV1013 GUI Settings for an LO with Upper Sideband Settings and Set to IF Mode