Quick Start Guide
AD9102-EBZ
©
2010
Analog Devices, Inc. All rights reserved. Trademarks and
registered trademarks are the property of their respective owners.
D00000-0-1/0
Figure 7 : Example 4 Result
Example5 Set-Up
a.
Select the RAM tab
b.
Press the download data from file button
c.
Select the vector file example5_RAM_guassian.txt
d.
Select the Register_Write_Sequence tab
e.
Press the “Write Active Tab” button, wait for a write active tab followed by a read active tab operation to
complete
f.
Highlight the Default.seq file and example5.regval file – see Figure 2Error! Reference source not found.
g.
Click on the “Load Register Sequence from File” button
h.
Open the Board Config tab, Set Trigger slide switch to ON, Press Write Active Tab Button
i.
Set trigger slide switch to OFF, Press Write Active Tab Button
j.
The outputs from J2 and J8 will be as displayed in Figure 8
Figure 8 : Example 5 Result
Example6 Set-Up
a.
Select the Register_Write_Sequence tab
b.
Highlight the Default.seq file and example6.regval file – see Figure 2
c.
Click on the “Load Register Sequence from File” button
d.
Open the Board Config tab, Set Trigger slide switch to ON, Press Write Active Tab Button
e.
Set trigger slide switch to OFF, Press Write Active Tab Button
f.
The outputs from J2 and J8 will be as shown in Figure 9
