Quick Start Guide
AD9102-EBZ
©
2010
Analog Devices, Inc. All rights reserved. Trademarks and
registered trademarks are the property of their respective owners.
D00000-0-1/0
Figure 5 : Example 2 Result
Example3 Set-Up
a.
Select the Register_Write_Sequence tab
b.
Highlight the Default.seq file and example3.regval file – see Figure 2Error! Reference source not found.
c.
Click on the “Load Register Sequence from File” button
d.
Open the Board Config tab, Set Trigger slide switch to ON, Press Write Active Tab Button
e.
Set trigger slide switch to OFF, Press Write Active Tab Button
f.
The outputs from J2 and J8 will be as shown in Figure 6
Figure 6 : Example 3 Result
Example4 Set-Up
a.
Select the Register_Write_Sequence tab
b.
Highlight the Default.seq file and example4.regval file – see Figure
2
c.
Click on the “Load Register Sequence from File” button
d.
Open the Board Config tab, Set Trigger slide switch to ON, Press Write Active Tab Button
e.
Set trigger slide switch to OFF, Press Write Active Tab Button
f.
The outputs from J2 and J8 will be as shown in Figure 7
