ANADOLU ISUZU CITIPORT E6 2019, Руководство пользователя

Страница: 77 / 97

77
CONTROL OF BRAKE DISCS AND PADS
Pad warning indicator must be controlled regularly. It has to be taken
to the authorized service when the pad indicator value is 10%. Right and
left brake pads on the same axle must be replaced together. The original
brake parts specified by the manufacturer of the vehicle must be used.
The brake discs have to be controlled and replaced if needed while replacing the pads.
Otherwise the performance of the brakes could be effected negatively.
TRANSMISSION MAINTENANCE
The oil type must be TE-ML20.110 according to ZF specs and 20E or 20F. The
transmission contains 38 lt oil at first filling. While replacing the oil, it has to be waited
approximately 10 minutes for the oil to discharge and then 24 lt oil must be added.
Oil Level Control
Oil level control when the transmission is cold (30°C):
30°C
cold
•
Park the vehicle on a flat area
•
Bring the transmission to “N” position
•
Operate the engine at 1200–1500 rpm for 10-20 seconds
•
Take the engine to idle
•
Oil level should be 30 °C (cold) level on the oil dipstick.
Oil level control when the transmission is hot (90 °C)
90°C
hot
•
Park the vehicle on a flat area
•
Bring the transmission to “N” position
•
Operate the engine at 1200–1500 rpm for 10-20 seconds
•
Take the engine to idle
•
Oil level should be 90 °C (hot) level on the oil dipstick