Ana-U EasyPrinter S3, Руководство пользователя, Страница: 9 / 29

EasyPrinter S3 Users Manual
Thickness of Cards:
This device is made to process cards with thickness between 0.3 mm and 0.9
mm.
To ensure the quality of the TRW surface, we also recommend testing and
approval of cards by ANA-U with about 50 card samples. Further card
productions should be checked against those samples, to ensure the same
quality and behaviour.
Rewritable Materials
The following materials are currently compatible:
•
Mitsubishi Blue TRW foil
•
Mitsubishi Black TRW foil
Environment
You should position your printer on a sturdy, even surface in a well-ventilated
room. Room temperature should be moderate, with no abrupt temperature
changes or variations in humidity.
Storage and Delivery Conditions
•
Storage temperature: 0°C to +50°C
•
Relative humidity: 10% to 90% (no condensation)
•
Operative Conditions
•
Temperature: +10°C to +35°C
•
Relative humidity: 20% to 80% (no condensation)
•
Keep out of direct sunlight
•
Keep away from chemicals, liquids, lubricants, dust, etc.
Power Source and Consumption
The printer is connected to power supply via
an external power supply.
•
Input Voltage Range: 100-240 VAC
•
Input Current: 2A RMS max.
•
Frequency: 50-60Hz
The power supply unit is self adjusting to
the appropriate mains voltage. It's
compliance can be seen on the picture
on the right side.
Page 5 of 25 Version 1.4 - 27. March 2012
Picture 3: Power supply
compliance